Thickness 0.04-2.0mm Inconel Nickel Alloy 718 Cold Rolled Strip ASTM B670 UNS N07718

A-ONE ALLOY supply Inconel 718 nickel alloy strip with minimum thickness of 0.04mm.

N07718 strip size range:

Thickness: 0.04~2.0mm

Width: 10~200mm

N07718 is a Ni-Cr-Mo alloy designed to resist a wide range of severely corrosive environments, pitting and crevice corrosion.

It displays exceptionally high yield, tensile, and creep-rupture properties at high temperatures. This nickel alloy is used from cryogenic temperatures up to long term service at 1200° F(650°C). One of the distinguishing features of N07718’s composition is the addition of niobium to permit age hardening which allows annealing and welding without spontaneous hardening during heating and cooling. The addition of niobium acts with the molybdenum to stiffen the alloy’s matrix and provide high strength without a strengthening heat treatment. Other popular nickel-chromium alloys are age hardened through the addition of aluminum and titanium. This nickel steel alloy is readily fabricated and may be welded in either the annealed or precipitation (age) hardened condition.

Chemical composition

Characters

• Good mechanical properties – tensile, fatigue and creep-rupture
• Yield tensile strength, creep, and rupture strength properties are exceedingly high
• Highly resistant to chloride and sulfide stress corrosion cracking
• Resistant to aqueous corrosion and chloride ion stress corrosion cracking
• High temperature resistant
• Age-hardenable with a unique property of slow aging response that permits heating and cooling during annealing without the danger of cracking.
• Excellent welding characteristics, resistant to postweld age cracking

Applications

• Chemical processing
• Aerospace
• Liquid fuel rocket motor components
• Pollution-control equipment
• Nuclear reactors
• Cryogenic storage tanks
• Valves, fasteners, springs, mandrels, tubing hangers
• Well head completion equipment and blow out preventers (BOP’s)
• Gas turbine engine parts